National Office Interiors and Liquidators is an authorized HON dealer partner. We buy new HON furniture directly from the manufacturer for our customers, and the full HON catalog is available to order. Browse everything HON builds in the HON digital catalog, then tell us what you want and we will quote it.
HON covers the working core of an office: task and conference seating, desks and private office casegoods, workstations, tables, and filing and storage. Below are the lines customers ask us for most, plus two projects we have completed.
HON Ignition Seating
Ignition is one of HON’s top selling task chair lines. It is the practical choice for an office that needs real ergonomic adjustment without paying designer-chair prices, which is why it shows up everywhere from single private offices to floors of a hundred seats.
Ignition also includes matching guest and multi-purpose seating, so a conference room or a lobby can carry the same line as the desks around it. Fabric, mesh, and frame colors are chosen per order.
What you get on an Ignition 2.0 task chair:
- Synchro-tilt control with seat slider, so the back and seat recline together in proportion and the seat depth adjusts to leg length.
- Height and width adjustable arms, so the chair fits the person rather than the other way around.
- Adjustable lumbar support you can position to your own back.
- 4-way stretch mesh back for airflow and lumbar give, or a fully upholstered back if you want a more traditional look.
- Mid-back and low-back heights, plus task stools for counter height and standing height desks.
- Warranted by HON for users up to 300 pounds.
HON 10500 Series Desks and Casegoods
The 10500 Series is HON’s bestselling desk collection. The surfaces are premium multi-ply laminate that stands up to scratches, spills, and stains, which matters more than it sounds like it does on a desk that has to look presentable for ten years.
The collection builds out in pieces, so you can start with a desk and add to it over time.
- Double pedestal desks, used alone or paired with a credenza and stack-on hutch for a full executive setup.
- Bridges that connect desks, returns, and credenzas into L-shaped or U-shaped workstations.
- Standing height desk shells with a 42 inch high worksurface.
- Mobile pedestals that fit any desk, return, or credenza shell.
- More than 90 surface material combinations across woodgrain, solid, and patterned finishes.
That last point is the practical one. If you are matching an existing office or a brand palette, the finish range is wide enough that you usually do not have to compromise.
HON Accelerate Cubicles and Workstations
Accelerate is HON’s panel system for open floors, built around interchangeable components so a layout can change later without replacing it. That is the reason to choose a panel system over fixed furniture in the first place: headcount moves, and the stations should be able to move with it.
This is the part of a project where layout matters more than the catalog. Send us a floor plan and a headcount and we will work out how the stations actually fit the space.
- Thin profile and frameless glass panels that give you privacy at the desk without cutting off daylight across the floor.
- Variable panel heights, from low sightline dividers up to full height privacy.
- In-line, L, T, X, and 120 degree connectors, so you are not limited to straight rows.
- Personal storage elements and a range of worksurface options specified into the station rather than added on afterward.
HON SoCo Lounge Seating
SoCo is HON’s modular lounge series, built for lobbies, waiting areas, break rooms, co-working floors, and the in-between spaces an open plan office needs.
It works like a kit. Single seats, curve seats, inside and outside curves, quarter circles, and square corners, each available with or without a back, join with simple connectors that let you take a run apart and rebuild it somewhere else. That is how you get the S shape in the photo, and it is how the same pieces become a straight bench along a wall, a circle around a column, or a few freestanding clusters.
Serpentine layouts are available with power built in, so a lounge cluster works as real seating for laptop work rather than as decoration.
Sizes to plan around:
- Curve seat: 55″W x 30″D x 18 1/2″H
- Inside curve seat with back: 55″W x 30″D x 30″H
Companion tables come from HON’s Sculpt line: round tray tables at 18 and 30 inches, a 30 inch square tray top table on low legs, a 53 inch pill shaped console, and personal tables sized for a laptop. Upholstery is specified per order.
This is a category customers are often surprised we can source, and it is worth asking about. A lobby is usually the first thing a client sees.
HON Projects by National Office Interiors
Both photos below are from our own projects, not manufacturer catalog images.
HON Abound Workstation, Phoenix, Arizona
A HON Abound 8×10 stand-alone powered workstation from a project in Phoenix, Arizona, specified with a lateral file, a box/box/file pedestal, and overhead storage, in Harvest laminate with Appoint Artichoke fabric and charcoal finishes.
Abound is HON’s higher specification panel system. Stand-alone means the station does not need a surrounding run of connected cubicles to work, and powered means electrical is built into the panels rather than run across the floor. Abound also works with HON’s Abode workstations, Accelerate panels, and the Coordinate height-adjustable base, so a floor can mix systems without looking like it was furnished twice.
The storage mix here is the part worth copying. A lateral file, a box/box/file pedestal, and overheads together give one person filing, personal storage, and reference space inside the station footprint, which is usually cheaper and tidier than adding a credenza along the wall.
HON Preside Conference Table, Houston, Texas
A HON Preside 14 foot conference table with grommets, in mahogany, from a project in Houston, Texas.
Preside is HON’s conference table line. A table this long is not a single slab. It is built from a two-piece laminate top on panel bases, with the base kit sized to the length of the top, and adder sections available to extend it further. The practical result is that the room sets the length instead of a catalog size choosing it for you.
The grommets bring cable access up through the surface instead of leaving cords to cross the floor. On a 14 foot table that is not a detail, it is the difference between a room that works for a presentation and one where someone is taping an HDMI cable to the carpet.
Preside tops also come in round and boat shapes, on panel bases or X-bases, and bases are made for 48 and 54 inch deep tops as well as narrower 30 and 36 inch depths. That range is what lets a boardroom table and a small huddle room table carry the same mahogany without looking like two different purchases.
One room, two manufacturers
The client specified Friant New Madison high back leather conference chairs in black, which we supplied on the same project. Mixing brands inside one room is completely normal on a contract job, and often it is the right answer: HON had the table this client wanted, Friant had the chair.
Because we are an authorized dealer partner for both, that stayed one order with one point of contact instead of two vendors to coordinate.
This is worth knowing before you assume a space has to come from a single brand. We are dealer partners for several new contract manufacturers, so a room can be specified on the merits, the table from whoever builds the best table for your budget, the chairs from whoever builds the best chair, the storage from whoever fits the wall. You get the room you actually want, and you still deal with one company.
If you are working on something similar, send us the room dimensions and we will spec it the same way.
More From the HON Catalog
- Custom desks and casegoods built to the footprint you have, in the finish you want.
- Healthcare furniture for patient rooms, exam rooms, and clinic waiting areas.
- Education furniture for classrooms, training rooms, libraries, and campus common areas.
- Government and public sector offices, including municipal and civic workspaces.
- Filing and storage, from lateral files and vertical files to storage towers and bookcases.
- Tables for conference rooms, training rooms, and break rooms, including mobile and nesting options.
Customize It to Fit Your Space
New HON is contract furniture, so you get to configure it. You choose the size, the layout, the finish, and the fabric, which means the furniture fits the room you actually have and matches the look you are going for. Custom sizes are available where a standard footprint will not work.
Tell us the dimensions, the number of people, and the look you want, and we will put the configuration together with you. There is no minimum order. A single task chair and a full floor of workstations are both normal requests.
How Pricing and Ordering Work
New HON is quoted to the project. Every configuration is different, so the price follows the models, sizes, finishes, and quantities you choose. We build the number around your actual specification instead of a packaged option.
Send us what you are working on and a sales representative will put the quote together with you, including delivery and installation for your location. Nothing is ordered until you approve it.
Delivery and Installation
We deliver and install nationwide. Where we do not have a location of our own, we work with local installation partners. If you would rather use your own installer or your own internal team, we can ship freight instead. More detail is on our shipping and delivery page.
Come See Us
We have five showrooms: Irvine, CA; Phoenix, AZ; Dallas, TX; Houston, TX; and Chicago, IL. All five are open Monday through Friday, 8 to 5. Walk-ins are welcome and no appointment is needed. See our showroom locations.
Get a HON Quote
New HON is configured for your project, so there is nothing to add to a cart. Send us the details instead: the room dimensions, the headcount, the lines you are interested in, and any finish or fabric direction you already have. A furniture associate will work through the specification with you and come back with pricing, including delivery and installation for your location.
Request a custom contract quote
Alongside new HON, we stock goSIT, our own line of new quick-ship casegoods and seating, and a rotating inventory of pre-owned office furniture that regularly includes used HON. Those are priced on the site and can be quoted directly from the product pages.